|
D.J. Basic packages are economical assemblies that are available for single or duplex independent dosing requirements and intended for use with pumps ordered with multi-function valves. A fabricated pump stand is integral to the frame, constructed of ½" UV-stabilized HDPE. The suction piping assembly is ½" nominal Schedule 80 PVC and includes a ball isolation valve, clear PVC y-type sediment strainer, and a calibration column with isolation valve; all of which are firmly mounted to the frame. The discharge piping assembly is also ½" nominal Schedule 80 PVC and includes a discharge isolation ball valve.
D.J.’s Standard packages are full featured assemblies that can be ordered as single, duplex lead/standby or duplex independent dosing. Features include full drip rim containment, raised bolt hole pads within the containment area and a ½" drain port. A fabricated pump stand is integral to the frame, constructed of ½" UV-stabilized HDPE. The suction piping assembly is ½" nominal Schedule 80 PVC and includes a ball isolation valve, clear PVC y-type sediment strainer, and a calibration column with isolation valve; all of which are firmly mounted to the frame. The discharge piping assembly is also ½" nominal Schedule 80 PVC and includes a complete set of discrete metering accessories: pulsation dampener, pressure gauge with isolator, back-pressure relief valve and pressure relief valve and discharge isolation ball valve.
These premium configuration options can be applied to any Standard System to provide a truly
unique pumping solution. Simply determine which Standard System best suits your needs, and modify that arrangement
with any of the following options. Please consult the factory for options not shown below, and for pricing and lead time.
• PVDF Piping - Fused
• 316SS Piping - Threaded
• Auto Fill Calibration Columns
• Conduit Box for Power & Signal
• Flow Verification on the Pump
• 5 Function Valve on the Pump
| 
